Común fallas de gas detector después agua entrada

1. Corrosión de el instrumento carcasa
If it is washed by rain for a long time, the shell of the gas detection alarm is easy to corroy, which will cause the instrument to wear and be thinner and crack, which will affect its it definition and sensitivity and cause damage.

2. The instrument is short-circuited by water
Si el instrumento es expuesto a lluvia para a largo tiempo o el vidrio cubierta es no sujetado en en lugar después apertura, agua de lluvia se fluye en en el instrumento. Si el instrumento es no encendido apagado, it will causa a corto circuito on el instrumento circuito placa y afecta su normal funcionamiento.

3. El interno componentes de el instrumento es corroídos y dañados
Agua o long-term inmersión de el instrumento voluntad causa moho on el interno circuito placa de el instrumento, scrapping of the internal chip of the sensor, damage to the pressure diaphragm, corrosion and damage to the signal board, etc., making it unusable.

Cómo para proteger el gas detector y asegurar la precisión detección?

1. Instalar la lluvia cubierta
Install a rain cover on the instrument to protect the instrument from rain in rainy days. Efectivamente evitar agua daño a el instrumento, thereby prolonging the service life of the instrument.

2. Strengthen the glass cover of the instrument

3. Timely maintenance
Although the protection level of the current instruments generally reaches IP66, due to the influence of special weather and manual operation errors, the phenomenon of water ingress and immersion of the instrument occurs from time to time. The staff should conduct inspections in time, and if any abnormalities are found, they should contact professionals or return to the factory for repairs in time.